Plasma Torches

Torch Model	Features	Controller
Delta	3 Anode Enhanced Arc Stability 1 Power Supply Custom Delta Contoller	MF-P 1000 C Compact Plasma Spray Controller Used with All Single Electrode Plasma Torches Siemens S7 PLC Siemens Touch Screen Operator Panel TP 177B Easy to read colour monitor Mass flow controller 100 l/min for Argon (primary plasma gas) Mass flow controller 15 l/min for hydrogen (secondary plasma gas) Mass flow controller 10 l/min for argon (carrier gas) Pressure sensor for argon inlet pressure Pressure sensor for hydrogen inlet pressure TWIN type single hopper powder feeder (1.5 or 5.5 liter volume) with mixer Gas warning sensor with alarm unit 600 x 600 x 1.300 mm (L x W x H) “All in One“ Unit May be Purchased Separately
GTV 300 (F4)	Robust, commonly used single cathode – single anode plasma torch F4 torch is also available with special handle for manual coating operation (Shown in picture)
GTV 301 (F6)	In comparison to the F4 torch, the F6 torch features improved ease of use and maintenance due to quick disconnect system
GTV 302 (P2)	The P2 torch is based on the same technology as the F4 torch and contains identical nozzles and gas distribution rings. Electrodes show identical tip geometry, but are contact cooled and not directly cooled by cooling water Optimized parameter sets of F4 torch can be used with P2 torch 1 : 1 Compact design suitable for coating of internal surfaces
GTV 347 (F7)	Special torch for coating of internal surfaces Bores with minimum diameter of 90 mm can be coated This torch uses the same support as the F6 torch and so switching between the two torches is possible with negligible time for modification of the setup

Torch Model

Delta

Features

3 Anode
Enhanced Arc Stability
1 Power Supply
Custom Delta Contoller

Torch Model

GTV 300

(F4)

Features

Robust, commonly used single cathode – single anode plasma torch
F4 torch is also available with special handle for manual coating operation

Torch Model

GTV 301

(F6)

Features

In comparison to the F4 torch, the F6 torch features improved ease of use and maintenance due to quick disconnect system

Torch Model

GTV 302 (P2)

Features

The P2 torch is based on the same technology as the F4 torch and contains identical nozzles and gas distribution rings.
Electrodes show identical tip geometry, but are contact cooled and not directly cooled by cooling water
Optimized parameter sets of F4 torch can be used with P2 torch 1 : 1
Compact design suitable for coating of internal surfaces

Torch Model

GTV 347

(F7)

Features

Special torch for coating of internal surfaces
Bores with minimum diameter of 90 mm can be coated
This torch uses the same support as the F6 torch and so switching between the two torches is possible with negligible time for modification of the setup

Controller

MF-P 1000 C Compact Plasma Spray Controller

Used with All Single Electrode Plasma Torches

Siemens S7 PLC
Siemens Touch Screen Operator Panel TP 177B
Easy to read colour monitor
Mass flow controller 100 l/min for Argon (primary plasma gas)
Mass flow controller 15 l/min for hydrogen (secondary plasma gas)
Mass flow controller 10 l/min for argon (carrier gas)
Pressure sensor for argon inlet pressure
Pressure sensor for hydrogen inlet pressure
TWIN type single hopper powder feeder (1.5 or 5.5 liter volume) with mixer
Gas warning sensor with alarm unit
600 x 600 x 1.300 mm (L x W x H)

“All in One“ Unit

May be Purchased Separately